CNC Machine Monitoring & Production Software in Rajkot

Short answer

For a CNC or VMC shop in Rajkot, OpeEye gives the owner every machine live on the phone — running, setup, idle or down, pieces against target, downtime with reasons, OEE and job cost — from tablets set up on-site in one afternoon. Auto-count sensors and direct controller connections (Fanuc, Haas, Mitsubishi) can be added per machine later.

At a glance — Rajkot

On-site: Yes — demo and same-day setup anywhere in Rajkot district
Estates covered: Shapar-Veraval · Metoda (Lodhika) GIDC · Aji GIDC · Kothariya · Ravki · Bhaktinagar · Khirasara · Kuvadva
Also nearby: Gondal · Jetpur · Wankaner · Morbi (see Gujarat page)
Language: Gujarati floor training; dashboard in English
Hardware: Any Android tablet from a local shop; optional add-ons later
Trial: Free 15 days on 2–3 machines, setup included

Which parts of Rajkot do we set up in?

All of them — Rajkot is home, and most of our demos are a short drive. Where the job shops are:

Shapar-Veraval — the largest cluster of CNC job work and auto-component units; forging, casting and machining side by side.
Metoda GIDC (Lodhika) — machine-tool builders and their supplier shops; VMC-heavy precision work.
Aji GIDC & Aji Vasahat — older engineering estate, mixed conventional and CNC floors.
Kothariya & Ravki — fast-growing machine-tool and kitchenware machining units.
Bhaktinagar, Khirasara, Kuvadva, Navagam — smaller job-work and component shops.
Gondal road & Jetpur — diesel-engine and pump component machining.

What Rajkot shops machine — and why the register fails them

Rajkot machines for the diesel engine, submersible pump, bearing, auto-component and kitchenware industries, and it builds the machines themselves — the city is home to CNC makers such as Jyoti CNC and Macpower, and to hundreds of the job shops that run their turning centres and VMCs. Most of those shops are 5 to 30 machines, run two shifts, quote by the piece and live on job work with tight delivery dates.

That is exactly the floor where the register fails: many small jobs, frequent setups, tool changes every few hundred pieces, and an owner who finds out at 9 pm which machine stood idle for two hours. OpeEye was built on these floors, for these owners — the first tablets went onto Rajkot machines, and the product still gets its feature list from what Rajkot shop owners ask for at demos.

What you get — the same product, wherever the shop is

How on-site setup works in Rajkot

You book a demo. We come to your factory with a tablet, connect it to your Wi-Fi or a 4G hotspot, and show your own machines going live in twenty minutes. If you want to go ahead, we schedule an afternoon: we add your machines, parts and operators, mount tablets at the machines, and train the floor in Gujarati. Production is not stopped. By evening the owner is watching the shift from home.

Power cuts and patchy Wi-Fi are normal in the estates, so the tablets keep logging offline and sync when the connection returns with the original times. Nothing is lost during a cut.

Rajkot shops that get the most out of OpeEye

Job-work units, 5–30 machines

Many small orders, frequent setups. Cost per piece and setup-vs-plan are the numbers that change quoting.

Component makers on two shifts

Night shift output that finally matches the day shift's — because both are measured from the same taps.

Owners who travel

Customer visits in Ahmedabad or Pune, and the floor is still on the phone. Breakdown alerts in seconds.

See your Rajkot floor live — this week.

A 20-minute demo on your own machines, on-site. Free 15-day trial, floor training in Gujarati or Hindi, nothing to buy from us.

Book a demo WhatsApp us

Questions from Rajkot shop owners

Do you really come to the factory in Rajkot?

Yes. Demo and setup are on-site anywhere in Rajkot district — Shapar-Veraval, Metoda, Aji, Kothariya, Ravki, Bhaktinagar, Gondal, Jetpur. We are based in Rajkot; most visits are the same week.

Will my operators understand it? Most of them read Gujarati, not English.

Floor training is done in Gujarati on setup day, and the tablet uses big buttons and icons — pieces, reject, tool change, pause, breakdown — with a PIN login. Operators who use WhatsApp are comfortable within the first hour.

Our estate has power cuts and weak Wi-Fi. Will it work?

Yes. Tablets keep logging without internet and sync automatically when it returns, with the original times, so reports stay correct. A basic Wi-Fi router or a 4G hotspot is enough.

We have old Jyoti and Macpower machines and some conventional lathes. Does it work with them?

Yes — with the tablet, every machine is monitored the same way regardless of brand or age. On newer Fanuc- or Mitsubishi-controlled machines you can optionally add a direct controller connection later.

How much does it cost for a Rajkot shop?

₹399 per machine per month — the same whether the machine is on Manual (operators tap on a tablet) or Automatic (the machine counts itself). Automatic adds a one-time auto-count box per machine, installed by us, quoted in the demo; a direct controller connection, where the control supports it, uses one gateway shared by the floor. More than 15 machines: volume pricing on request. No per-user fees, no setup fee, no long contract, free 15-day trial. Tablets are the only hardware you buy, locally.

Can I try it on a few machines first?

Yes — the free 15-day trial runs on two or three of your machines with setup help included, so you see your own floor's real numbers before paying anything.

Nearby & related

Prefer to read in Gujarati or Hindi? ગુજરાતી · हिन्दी