# OpeEye

> Machine monitoring & production tracking software for CNC job shops. Built in Rajkot, Gujarat, India. Live machine status, production vs target, OEE, downtime with reasons, breakdown alerts, job costing, tool life and automatic shift/daily production reports for CNC and VMC machine shops.

OpeEye is built for small and mid-size CNC job shops (roughly 3–50 machines). Data comes from operator tablets at each machine (works with any machine of any age, no wiring), optionally from a small auto-count sensor box wired to the machine's cycle signal, and — rolling out — from a read-only direct connection to Fanuc, Haas and Mitsubishi controllers via an on-premises gateway. Offline-first: tablets keep logging without internet and sync later.

Priority markets, in order: Rajkot, Ahmedabad, Gujarat, India, then international. On-site demos and same-day setup across Gujarat; remote setup elsewhere. Support in Gujarati, Hindi and English.

Pricing: ₹399 per machine per month — the same whether the machine is on Manual (operators tap on a tablet) or Automatic (the machine counts itself). Automatic adds a one-time auto-count box per machine, installed by us, quoted in the demo; a direct controller connection, where the control supports it, uses one gateway shared by the floor. More than 15 machines: volume pricing on request. No per-user fees, no setup fee, no long contract, free 15-day trial. Tablets are the only hardware you buy, locally.

Contact: hello@opeeye.com · WhatsApp/phone +919586757458 · https://opeeye.com/#book-demo

## Features

- Live machine status board (running, setup, paused, breakdown, idle)
- Production vs target tracking per machine, operator, shift and job
- Machine downtime tracking with reasons and root cause
- Breakdown alerts on the owner's phone
- OEE per machine and per job
- Operator efficiency reports
- Automatic shift reports and daily production reports
- Job cards, part masters and job costing
- Rejection logging with reasons
- Tool life, tool changes and coolant tracking
- Machine timeline (minute-by-minute history)
- Wall TV mode for the shop floor
- Offline-first operator tablets that sync when the connection returns
- Auto-count sensor box per machine (optional add-on)
- Direct CNC controller connection — Fanuc, Haas, Mitsubishi (rolling out)

## Product

- [CNC machine monitoring](https://opeeye.com/cnc-machine-monitoring-software): What CNC machine monitoring software does, how OpeEye monitors every machine live — by operator tablet, auto-count sensor or direct controller connection — and what it costs for a small or mid-size job shop in India.
- [Production tracking](https://opeeye.com/production-tracking-software): Track pieces produced against target per machine, operator, shift and job — live, without registers. Job cards, rejection reasons, automatic shift reports and daily production reports for machine shops.
- [OEE software](https://opeeye.com/oee-software): OEE per machine and per job, computed from what actually happened on the floor. How OpeEye measures availability, performance and quality for CNC job shops, and why the diary version is always wrong.
- [Downtime tracking](https://opeeye.com/machine-downtime-tracking): Log every stoppage with a reason, get a breakdown alert on your phone in seconds, and see which machines, tools and causes eat the most hours. Downtime tracking software built for Indian machine shops.
- [How it works](https://opeeye.com/how-it-works): Three ways to get production data off the floor: an operator tablet at each machine, a small auto-count box wired to the machine's cycle signal, or a direct connection to Fanuc, Haas and Mitsubishi controllers. Mix them on one floor.
- [Pricing](https://opeeye.com/pricing): OpeEye pricing: ₹399 per machine per month, Manual (operator tablet) or Automatic (the machine counts itself), every feature and unlimited users. Automatic adds a one-time auto-count box per machine. No setup fee, no contract, free 15-day trial, volume pricing above 15 machines.

## Locations

- [Rajkot](https://opeeye.com/cnc-machine-monitoring-rajkot): Machine monitoring and production tracking software built in Rajkot for job shops in Shapar-Veraval, Metoda GIDC, Aji, Kothariya, Ravki and Bhaktinagar. On-site demo and same-day setup.
- [Ahmedabad](https://opeeye.com/cnc-machine-monitoring-ahmedabad): Live production monitoring for CNC and VMC shops in Ahmedabad — Vatva, Naroda, Odhav, Changodar, Sanand and Kathwada. Operator tablets, OEE, downtime and shift reports. On-site demo.
- [Gujarat](https://opeeye.com/cnc-machine-monitoring-gujarat): Production tracking and machine monitoring for engineering units across Gujarat — Morbi, Jamnagar, Surat, Vadodara, Bhavnagar, Anand and Vapi. Built in Rajkot, supported on-site across the state.

## Guides

- [Guides](https://opeeye.com/guides): Plain-language guides for CNC shop owners in India: how to calculate OEE, a daily production report format, downtime reason codes, and how to choose between tablet, sensor and controller-based monitoring.
- [How to calculate OEE](https://opeeye.com/guides/how-to-calculate-oee): OEE = Availability × Performance × Quality. A worked example for a CNC shop running two shifts, the numbers you need from the floor, an online calculator, and the mistakes that make OEE look better than it is.
- [Daily production report format](https://opeeye.com/guides/daily-production-report-format): A daily production report format that works for a job shop: the columns to include per machine and per operator, a shift summary, downtime by reason, and how to generate it automatically instead of at 9 pm.
- [Downtime reason codes](https://opeeye.com/guides/machine-downtime-reasons): A ready-to-use list of downtime and pause reasons for CNC and VMC shops — breakdown, setup, tooling, material, power, quality, operator — grouped so operators pick the right one in one tap and the reports mean something.
- [Tablet vs sensor vs controller](https://opeeye.com/guides/tablet-vs-sensor-vs-controller-machine-monitoring): An honest comparison of the three ways to monitor CNC machines — operator tablets, auto-count sensor boxes and direct controller connections (Fanuc, Haas, Mitsubishi): what each one knows, what it costs, when it fails, and how to combine them.
- [Machine monitoring cost in India](https://opeeye.com/guides/machine-monitoring-software-cost-india): What machine monitoring and production tracking software costs in India in 2026: per-machine vs per-user pricing, hardware you may need, one-time vs monthly, hidden costs, and what a 10-machine shop should budget.

## Company

- [Home](https://opeeye.com): Live machine monitoring, production tracking, OEE, downtime and daily production reports for CNC machine shops. Start with operator tablets in one afternoon; add auto-count sensors or connect your CNC controllers when you are ready. Built in Rajkot, Gujarat.
- [About](https://opeeye.com/about): OpeEye is production monitoring software for CNC job shops, built in Rajkot, Gujarat, on the floors of working machine shops. Who we are, what we build, where we work and how to reach us.
- [Privacy](https://opeeye.com/privacy): How OpeEye collects, uses, and protects data in the OpeEye Operator mobile app and the OpeEye web platform.

## Other languages

- [ગુજરાતી](https://opeeye.com/gu): તમારા CNC કારખાનાનું દરેક મશીન, દરેક ઓપરેટર, દરેક જોબ — તમારા ફોનમાં લાઈવ. ટેબ્લેટથી એક બપોરમાં શરૂ કરો; સેન્સર કે કંટ્રોલર કનેક્શન પછી ઉમેરો. રાજકોટમાં બનેલું.
- [हिन्दी](https://opeeye.com/hi): आपके CNC कारखाने की हर मशीन, हर ऑपरेटर, हर जॉब — आपके फोन पर लाइव। टैबलेट से एक दोपहर में शुरू करें; सेंसर या कंट्रोलर कनेक्शन बाद में जोड़ें। राजकोट में बना।

## Not what OpeEye is

- Not a CCTV/video system — "live" means live data, not video.
- Not an accounting or invoicing ERP — it sits alongside Tally or an ERP and supplies the production numbers.